A refrigerator is arguably one of the most used and hardworking appliances at home. It works 24/7 making sure that foods are well preserved, and cold drinks and ice are readily available. It is also among the top electricity consuming home appliances. However, with proper care and maintenance, you can minimize energy consumption and ensure it runs perfectly and lasts long.
An experienced technician has shared with us simple maintenance tips to keep your fridge in tiptop shape and trouble-free.
Empty ice and defrost the freezer
Ice and other frozen items can absorb odor. Over time, the smell can become foul and stinking. It can also form solid blocks that settle at the bottom of bins. To ensure that the ice remains smelling good, empty the ice bins and defrost the freezer every month. Remove everything from the freezer and leave an odor sucking baking soda overnight in it.
Check the door gasket
According to a technician specializing in appliance repair in Florida, Orlando, you can significantly reduce your energy consumption and avoid motor breakdowns by simply keeping the refrigerator doors tightly closed. This can be done by keeping the door gasket clean and free of grime.
Re-magnetize the door gasket
Inspect the door gasket at least every three months to see if there are any loose seals. If there are any loose seals, chances are the embedded magnet has already lost its magnetic potential. You can re-magnetize it by running a powerful magnet at each side of the gasket. Do this several times until the gasket can provide a proper seal. However, if this DIY troubleshooting fails, you would need to have new magnets installed by a repairman.
Keep condenser coils clean
Condenser coils are a crucial part of your refrigerator. Basically, these coils are where heat is released and keeps the fridge cold. If they are clogged with dust, dirt, pet hair and other debris, the compressor works harder thereby wasting energy and shortening its lifespan. Check the condenser coil (usually located at the back) and clean it at least every three months. Use a vacuum to remove dust and dry cloth to remove large debris.
Keep the fridge completely level
If you’re having a hard time closing the refrigerator door properly, chances are it’s not resting on a level base. To check if the unit is evenly grounded on the floor, place a level on top of it. If it is not completely level, adjust the refrigerator’s feet until it achieves a completely flat position. A refrigerator door that doesn’t close properly can hinder proper condensation and cooling, and strain its motors.
Replace water filter
Water filter needs to be replaced to prevent leaks, avoid clogging and ensure clean water and ice. Read your user’s manual for the recommended frequency of water filter replacement and how it should be done. Different refrigerator models will have different schedules for filter replacement although usually this is done every six months.
Clean the drip pan and drain hole
Food items, mineral deposits, and other residues can accumulate in the drain pan. Oftentimes, the foul smell of the refrigerator originates here. Make sure to clean this at least every four months to avoid nasty odors.
Keep your fridge looking good by cleaning its exterior with a damp cloth with a regular household cleaning agent. Make sure everything you put inside is placed in a covered container to prevent odors from accumulating in the freezer and fridge. You can also leave a box of baking soda or an odor-absorbing product inside the fridge to ensure that it always smells sweet.
Refrigerators are a costly investment. You want to make sure that you are taking good care of your unit to avoid unwanted problems. By following the tips mentioned above, you can avoid costly repairs or the need to buy a new fridge.